Xie Yi-Bo; Fang Chao-Yan; Chen De-Shuang; He Yue; Huang Shi-Hua

doi:10.7498/aps.73.20241372

Abstract

Laser induced sintering, also known as laser enhanced contact optimization (LECO), can significantly reduce the contact resistance between metal electrodes and silicon in TOPCon solar cells, thereby improving its efficiency. In this work, the effects of LECO process parameters such as reverse bias and laser intensity on the performance of TOPCon solar cells are investigated and their influencing mechanisms are analyzed in detail. In the LECO process, as the reverse bias voltage increases, the efficiency of the solar cell first increases and then decreases, while the contact resistivity first decreases and then increases. When the reverse bias voltage is high, the solar cell may experience reverse breakdown. Once the solar cell experiences reverse breakdown, both the illuminated and non-illuminated areas become conducting. Due to the current diversion effect, the local conducting current density in the illuminated area is much lower than the current density without reverse breakdown of the solar cell, Therefore, the Joule heating caused by this is also much smaller, and the contact resistance between the metal and silicon increases, resulting in a decrease in the efficiency of the solar cell.Secondly, the influence of secondary high-temperature sintering and secondary LECO on the performance of TOPCon is studied. When the secondary sintering temperature increases from 280 ℃ to 680 ℃, the efficiency of TOPCon sharply decreases from 26.35% to 1.3%. However, by subjecting the solar cells that have undergone secondary high-temperature sintering to secondary LECO treatment, the efficiency can be restored to the level before the secondary high-temperature sintering. Thirdly, TOPCon solar cells prepared using improved pure silver paste does not form effective metal-semiconductor contact between the silver electrode and silicon before LECO treatment, resulting in an average efficiency of only 0.02%. However, after LECO treatment, the efficiency of solar cells using pure silver paste increases to 26.35%, which is 0.41% higher than the reference solar cells using traditional silver aluminum paste. Fourthly, a physical model of LECO induced silver-silicon contact formation is proposed, providing a reasonable explanation for how secondary high-temperature sintering and secondary LECO treatment affect the performance of TOPCon. This is of great significance for further understanding and optimizing the application of LECO technology in TOPCon solar cells.

Keywords:

Authors and contacts

Corresponding author: He Yue, hey@dmegc.com.cn ; Huang Shi-Hua, huangshihua@zjnu.cn

Funds: Project supported by the Key Research and Development Program of Zhejiang Province, China (Grant No. 2021C01006).

FullText HTML : translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]

Cited By

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

DownLoad: Full-Size Img PowerPoint

V_OC/mV J_SC/(mA·cm^–2) FF E_ff/%

传统银铝浆料 740 42.03 0.834 25.94
改良后纯银浆料 743 42.05 0.844 26.35

DownLoad: CSV

map

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]

[1]	Tian Shan-Shan, Gao Qian, Gao Ze-Ran, Xiong Yu-Chen, Cong Ri-Dong, Yu Wei. Design of back-contact interface of Cu(In,Ga)Se₂ solar cells by single-target magnetron sputtering. Acta Physica Sinica, 2024, 73(17): 178801. doi: 10.7498/aps.73.20240732
[2]	Han Xiao-Jing, Yang Jing, Zhang Jia-Li, Liu Dong-Xue, Shi Biao, Wang Peng-Yang, Zhao Ying, Zhang Xiao-Dan. Electron transport layer of tin dioxide deposited by reactive plasma and its application in perovskite solar cells. Acta Physica Sinica, 2023, 72(17): 178401. doi: 10.7498/aps.72.20230693
[3]	Li Xue-Rui, Lin Jun-Hui, Tang Rong, Zheng Zhuang-Hao, Su Zheng-Hua, Chen Shuo, Fan Ping, Liang Guang-Xing. Back contact optimization for Sb₂Se₃ solar cells. Acta Physica Sinica, 2023, 72(3): 036401. doi: 10.7498/aps.72.20221929
[4]	Xiao You-Peng, Wang Huai-Ping, Li Gang-Long. Numerical simulation of graphene/Ag₂ZnSnSe₄ induced p-n junction solar cell. Acta Physica Sinica, 2021, 70(1): 018801. doi: 10.7498/aps.70.20201194
[5]	Ren Cheng-Chao, Zhou Jia-Kai, Zhang Bo-Yu, Liu Zhang, Zhao Ying, Zhang Xiao-Dan, Hou Guo-Fu. Status and prospective of high-efficiency c-Si solar cells based on tunneling oxide passivation contacts. Acta Physica Sinica, 2021, 70(17): 178401. doi: 10.7498/aps.70.20210316
[6]	Zheng Jian-Dong, Niu Jin-Chao, Zhong Hong-Xian, Gong Zi-Zheng, Cao Yan. Hypervelocity impact damage properties of solar arrays by using two-stage light gas gun. Acta Physica Sinica, 2019, 68(22): 220201. doi: 10.7498/aps.68.20191132
[7]	Zhao Sheng-Sheng, Xu Yu-Zeng, Chen Jun-Fan, Zhang Li, Hou Guo-Fu, Zhang Xiao-Dan, Zhao Ying. Research progress of crystalline silicon solar cells with dopant-free asymmetric heterocontacts. Acta Physica Sinica, 2019, 68(4): 048801. doi: 10.7498/aps.68.20181991
[8]	Xiao Wen-Bo, Liu Wei-Qing, Wu Hua-Ming, Zhang Hua-Ming. Review of Parameter extraction methods for single-diode model of solar cell. Acta Physica Sinica, 2018, 67(19): 198801. doi: 10.7498/aps.67.20181024
[9]	Chen Pei-Zhuan, Yu Li-Yuan, Niu Ping-Juan, Fu Xian-Song, Yang Guang-Hua, Zhang Jian-Jun, Hou Guo-Fu. Numerical study on conical two-dimensional photonic crystal in silicon thin-film solar cells. Acta Physica Sinica, 2018, 67(2): 028802. doi: 10.7498/aps.67.20171689
[10]	Xiao Di, Wang Dong-Ming, Li Xun, Li Qiang, Shen Kai, Wang De-Zhao, Wu Ling-Ling, Wang De-Liang. Nickel oxide as back surface field buffer layer in CdTe thin film solar cell. Acta Physica Sinica, 2017, 66(11): 117301. doi: 10.7498/aps.66.117301
[11]	Xiao You-Peng, Gao Chao, Wang Tao, Zhou Lang. Carrier selective contacts:a selection of high efficiency silicon solar cells. Acta Physica Sinica, 2017, 66(15): 158801. doi: 10.7498/aps.66.158801
[12]	Jia Xiao-Jie, Ai Bin, Xu Xin-Xiang, Yang Jiang-Hai, Deng You-Jun, Shen Hui. Two-dimensional device simulation and performance optimization of crystalline silicon selective-emitter solar cell. Acta Physica Sinica, 2014, 63(6): 068801. doi: 10.7498/aps.63.068801
[13]	Wang Li, Zhang Xiao-Dan, Yang Xu, Wei Chang-Chun, Zhang De-Kun, Wang Guang-Cai, Sun Jan, Zhao Ying. Study of the contact property between BZO and p-a-SiC in amorphous silicon solar cell. Acta Physica Sinica, 2013, 62(5): 058801. doi: 10.7498/aps.62.058801
[14]	Xia Zhong-Qiu, Li Rong-Ping. First principles study of rare earth doped in ZnTe used for CdTe solar cell back contact layer. Acta Physica Sinica, 2012, 61(1): 017108. doi: 10.7498/aps.61.017108
[15]	Yan Yue, Zhao Su-Ling, Xu Zheng, Gong Wei, Wang Da-Wei. Effect of 3,4,9,10-perylenetetracarboxylic dianhydride on the performance of ZnO nanorods/polymer hybrid solar cell. Acta Physica Sinica, 2011, 60(8): 088803. doi: 10.7498/aps.60.088803
[16]	Xu Shuang-Ying, Hu Lin-Hua, Li Wen-Xin, Dai Song-Yuan. Effect of interface contacts between TiO2 particles on electron transport in dye-sensitized solar cells. Acta Physica Sinica, 2011, 60(11): 116802. doi: 10.7498/aps.60.116802
[17]	Zhang Yong, Liu Yan, Lü Bin, Tang Nai-Yun, Wang Ji-Qing, Zhang Hong-Ying. Influence of barrier height of the front contact on the amorphous silicon and microcrystalline silicon heterojunction solar cells. Acta Physica Sinica, 2009, 58(4): 2829-2835. doi: 10.7498/aps.58.2829
[18]	Wu Wei-Cai, Zhou Yin-Hua, Wen Shan-Peng, Han Liang, Tian Wen-Jing. Effect of solvent on the performance of poly(2-methoxy-5-(2-ethyl-hexyloxy)-p-phenylene vinylene): N, N′-bis(1-ethylpropyl)-3,4,9,10-perylene bis(tetracarboxyl diimide) solar cells. Acta Physica Sinica, 2007, 56(8): 5003-5008. doi: 10.7498/aps.56.5003
[19]	Song Hui-Jin, Zheng Jia-Gui, Feng Liang-Huan, Cai Wei, Cai Ya-Ping, Zhang Jing-Quan, Li Wei, Li Bing, Wu Li-Li, Lei Zhi, Yan Qiang. Performance of CdTe solar cells with different back electrodes and back contact layers. Acta Physica Sinica, 2007, 56(3): 1655-1661. doi: 10.7498/aps.56.1655
[20]	He Jian-Xiong, Zheng Jia-Gui, Li Wei, Feng Liang-Huan, Cai Wei, Cai Ya-Ping, Zhang Jing-Quan, Li Bing, Lei Zhi, Wu Li-Li, Wang Wen-Wu. A study of back contacts of CdTe thin film solar cells. Acta Physica Sinica, 2007, 56(9): 5548-5553. doi: 10.7498/aps.56.5548

Catalog

Vol. 73, Issue 24 - 2024-12-20

Metrics

Abstract views: 463
PDF Downloads: 11
Cited By: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

Search

Article

留言板

Abstract

Authors and contacts

Corresponding author: He Yue, hey@dmegc.com.cn ; Huang Shi-Hua, huangshihua@zjnu.cn

FullText HTML : translate this paragraph

References

Cited By

Catalog

Metrics

Authors

Referees

About Journal

About

	V_OC/mV	J_SC/(mA·cm^–2)	FF	E_ff/%
传统银铝浆料	740	42.03	0.834	25.94
改良后纯银浆料	743	42.05	0.844	26.35

Search

Article

留言板

Abstract

Authors and contacts

Corresponding author: He Yue, hey@dmegc.com.cn ; Huang Shi-Hua, huangshihua@zjnu.cn

FullText HTML : translate this paragraph

References

Cited By

Catalog

Metrics

Publishing process

Authors

Referees

About Journal

About