- 必威体育下载

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

GH4742 nickel-based superalloy exhibits excellent mechanical properties, and grain size is a key factor affecting its performance. A physical model-based ultrasonic backscattering method makes grain size measurement accurate and efficient. Nevertheless, it is constrained by complex models or multiple measurements taken from various beam angles. As a result, a backscattering coefficient method that requires only a single measurement for grain size evaluation is proposed. In contrast to the existing methods, the proposed method solely focuses on the backscattering coefficient component of the backscattering signal. It effectively eliminates the influence of unrelated factors, such as the measurement system and the acoustic field, through the utilization of reference signals. The independent scattering model is employed to derive the backscattering coefficient, which solely pertains to the material itself. The relationship between grain size and backscattering coefficient is described by using a spatial correlation function. To consider the irrelevant factors, an experimental measurement method is developed by using the reference signals. Through numerical calculation and analysis, it has been observed that the backscattering coefficient is closely related to the frequency. When the product of the wavenumber and the grain size is significantly greater than 1 ( $ ka\gg 1 $ ), a Stochastic scattering limit is reached. Conversely, when $ ka\ll 1 $ , a Rayleigh scattering limit is observed. Furthermore, the backscattering coefficient is directly proportional to the grain size. As a general trend, larger grain sizes result in higher backscattering coefficient. Three sets of GH4742 specimens with different grain sizes are prepared for phased array ultrasound experiments. It can be observed that the experimental backscattering coefficients, root mean square (RMS) values, and the amplitude trend of time domain signal are consistent. To perform grain size inversion, the backscattering coefficients in the effective bandwidth range of the probe are selected. By utilizing the least-square method, the theoretical backscattering coefficient is employed to fit the curves of the experimental backscattering coefficients. The evaluation results are compared with those obtained by metallographic analysis. The results show that the grain sizes obtained by the proposed method have a maximum relative error of –22.7% and a minimum relative error of –3.7%.

Keywords:

Authors and contacts

Corresponding author:Guan Xue-Fei,xfguan@gscaep.ac.cn

Funds:Project supported by the National Natural Science Foundation of China (Grant Nos. 51975546, U2230204).

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]

Cited By

DownLoad: Full-Size Img PowerPoint

成分	Ti	Cr	Mo	Co	Nb	Mn	Fe	C	Al	B	Ni
质量分数%	2.52	14.0	5.12	9.95	2.6	0.2	0.5	0.06	2.54	0.01	Bal.

DownLoad: CSV

试块	金相法	金相法晶粒度	背散射系数法	背散射系数法晶粒度
No.1	55 μm	5.4	58 μm	5.2
No.2	77 μm	4.4	103 μm	3.6
No.3	163 μm	2.2	200 μm	1.7

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]

[1]	Zhang Ya-Jing, Li Fan, Lei Zhao-Kang, Wang Ming-Hao, Wang Cheng-Hui, Mo Run-Yang.Size quantification of non-spherical bubbles by ultrasound. Acta Physica Sinica, 2023, 72(3): 034301.doi:10.7498/aps.72.20222074
[2]	Zhang Feng-Guo, Zhao Fu-Qi, Liu Jun, He An-Min, Wang Pei.Dependence of spallstrength on temperature, grain size and strain rate in pure ductile metals. Acta Physica Sinica, 2022, 71(3): 034601.doi:10.7498/aps.71.20210702
[3]	.Spall strength dependence on temperature, grain size and strain rate in pure ductile metals. Acta Physica Sinica, 2021, (): .doi:10.7498/aps.70.20210702
[4]	Dong Rui, Liu Cheng-Cheng, Cai Xun-Bin, Shao Liu-Lei, Li Bo-Yi, Ta De-An.Measurement and compensation of frequency-dependent attenuation in ultrasonic backscatter signal from cancellous bone. Acta Physica Sinica, 2019, 68(18): 184301.doi:10.7498/aps.68.20190599
[5]	Li Shan, Li Xiong-Bing, Song Yong-Feng, Chen Chao.Ultrasonic sacttering unified theory for polycrystal material with grain sizes distribution. Acta Physica Sinica, 2018, 67(23): 234301.doi:10.7498/aps.67.20181751
[6]	Wang Peng, Xu Jian-Gang, Zhang Yun-Guang, Song Hai-Yang.Molecular dynamics simulation of effect of grain on mechanical properties of nano-polycrystal -Fe. Acta Physica Sinica, 2016, 65(23): 236201.doi:10.7498/aps.65.236201
[7]	Liu Ying-Guang, Zhang Shi-Bing, Han Zhong-He, Zhao Yu-Jin.Influence of grain size on the thermal conduction of nanocrystalline copper. Acta Physica Sinica, 2016, 65(10): 104401.doi:10.7498/aps.65.104401
[8]	Song Yong-Feng, Li Xiong-Bing, Shi Yi-Wei, Ni Pei-Jun.Effects of surface roughness on diffuse ultrasonic backscatter in the solids. Acta Physica Sinica, 2016, 65(21): 214301.doi:10.7498/aps.65.214301
[9]	Wu Liang-Liang, Zhao De-Gang, Li Liang, Le Ling-Cong, Chen Ping, Liu Zong-Shun, Jiang De-Sheng.Influence of growth conditions on the lateral grain size of AlN film grown by metal-organic chemical vapor deposition. Acta Physica Sinica, 2013, 62(8): 086102.doi:10.7498/aps.62.086102
[10]	Yang Wei-Ming, Liu Hai-Shun, Dun Chao-Chao, Zhao Yu-Cheng, Dou Lin-Ming.The mechanism of the anomalous variation of grain size for Fe-based nanocrystalline alloys. Acta Physica Sinica, 2012, 61(10): 106802.doi:10.7498/aps.61.106802
[11]	Wang Ying-Long, Zhang Peng-Cheng, Liu Hong-Rang, Liu Bao-Ting, Fu Guang-Sheng.Effects of grain size and substrate stress of ferroelectric film on the physical properties. Acta Physica Sinica, 2011, 60(7): 077702.doi:10.7498/aps.60.077702
[12]	Mao Chao-Liang, Dong Xian-Lin, Wang Gen-Shui, Yao Chun-Hua, Cao Fei, Cao Sheng, Yang Li-Hui, Wang Yong-Ling.Grain size dependence of the dielectric properties of Ba0.70Sr0.30TiO3 ceramics and its mechanisms. Acta Physica Sinica, 2009, 58(8): 5784-5789.doi:10.7498/aps.58.5784
[13]	Wang Hao, Liu Guo-Quan, Luan Jun-Hua, Yue Jing-Chao, Qin Xiang-Ge.Study on the relation among grain edge length, grain size and topology with Monte Carlo simulation. Acta Physica Sinica, 2009, 58(13): 132-S136.doi:10.7498/aps.58.132
[14]	Yu Bo-Lin, Qi Qiong, Tang Xin-Feng, Zhang Qing-Jie.Effect of grain size on thermoelectric properties of CoSb3 compound. Acta Physica Sinica, 2005, 54(12): 5763-5768.doi:10.7498/aps.54.5763
[15]	Feng Wei-Cun, Gao Ru-Wei, Han Guang-Bing, Zhu Ming-Gang, Li Wei.Exchange-coupling interaction and effective anisotropy of NdFeB nanocomposite permanent magnetic materials. Acta Physica Sinica, 2004, 53(9): 3171-3176.doi:10.7498/aps.53.3171
[16]	Teng Jiao, Cai Jian-Wang, Xiong Xiao-Tao, Lai Wu-Yan, Zhu Feng-Wu.The establishment and thermal stability of exchange bias in NiFe/FeMn bilayers. Acta Physica Sinica, 2004, 53(1): 272-275.doi:10.7498/aps.53.272
[17]	Li Mei-Juan, Hu Hai-Yun, Xing Xiu-San.The relationship between fatigue life and grain size of polycrystalline metals. Acta Physica Sinica, 2003, 52(8): 2092-2095.doi:10.7498/aps.52.2092
[18]	Teng Jiao, Cai Jian-Wang, Xiong Xiao-Tao, Lai Wu-Yan, Zhu Feng-Wu.Ｔｈｅｉｎｆｌｕｅｎｃｅｏｆ(Ｎｉ0 81 Ｆｅ0 1 9)1 -ｘＣｒｘｓｅｅｄｌａｙｅｒｏｎｔｈｅｅｘｃｈａｎｇｅｂｉａｓｏｆＮｉＦｅＦｅＭｎｂｉｌａｙｅｒｓ. Acta Physica Sinica, 2002, 51(12): 2849-2853.doi:10.7498/aps.51.2849
[19]	LIU WEI-GUO, KONG LING-BING, ZHANG LIANG-YING, YAO XI.PHASE TRANSITION IN POLYCRYSTALLINE FERROELECTRIC THIN FILMS——STRESS AND SIZE EFFECTS. Acta Physica Sinica, 1996, 45(2): 318-323.doi:10.7498/aps.45.318
[20]	WANG XIAO-PING, ZHAO TE-XIU, JI HANG, LIANG QI, DONG YI.EFFECT OF GRAIN SIZE ON TEMPERATURE COEFFICIENT OF RESISTIVITY OF Pd THIN FILMS. Acta Physica Sinica, 1994, 43(2): 297-302.doi:10.7498/aps.43.297

Catalog

Vol. 73, Issue 7 - 2024-04-05

Metrics

Abstract views:1335
PDF Downloads:73
Cited By:0

Search

Article