Improvement of performance of perovskite solar cells through BaTiO<sub>3</sub> doping regulated built-in electric field

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

The preparation of hybrid perovskite solar cells is expensive and environmentally demanding. Carbon-based HTL-free perovskite solar cells (C-PSCs) have attracted much attention because they replace the expensive precious metal electrode and remove the poor stability of the hole transport material. However, the improvement of efficiency is hampered by poor carrier separation and transport performance within C-PSCs, while the enhancement of the built-in electric field can improve the carrier transport performance, thus enhancing photoelectric performance. The built-in electric field can be regulated by doping. The anomalous photovoltaic effect and the built-in electric field of ferroelectric material play an important role in the field of optoelectronics. In this work, a simple and effective method is developed to improve the performance of perovskite solar cells via the combination of internal doping of ferroelectric polymer and external control of electric field. Ferroelectric material barium titanate (BaTiO ₃) powder is added into perovskite precursor solution as an additive to prepare C-PSCs, which can improve the perovskite film morphology, reduce the film defect density, and enhance the carrier transport performance of C-PSCs. The results show that when the addition of BaTiO ₃is 1.0% (mass fraction), the perovskite film is uniform and dense, and the photoelectric conversion efficiency of the cell is the highest. After the forward voltage polarization treatment, the residual polarized electric field of ferroelectric material BaTiO ₃increases the built-in electric field, which provides sufficient power for realizing carrier transport and extraction, thus inhibiting the occurrence of non-radiative recombination. At the same time, the depletion layer width is increased, and the reverse saturation current is reduced, so the cell performance is significantly improved. The optimal device efficiency is 9.02%. This work provides an efficient strategy for regulating the built-in electric field by doping perovskite absorption layer.

Keywords:

Authors and contacts

Corresponding author:Tao Hai-Jun,taohaijun@nuaa.edu.cn

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]

Cited By

DownLoad: Full-Size Img PowerPoint

	V_oc/V	J_SC/(mA·cm^–2)	FF/%	PCE/%
Pristine	0.868	10.39	48.26	4.35
0.5%	0.885	12.41	46.92	5.15
1.0%	0.904	12.72	50.99	5.87
2.0%	0.921	11.92	43.70	4.80

DownLoad: CSV

	V_oc/V	J_SC/(mA·cm^–2)	FF/%	PCE/%
Pristine	0.888	13.47	47.10	5.64
0.5 V/μm	0.989	15.72	55.66	8.65
1.0 V/μm	1.005	15.59	56.40	8.83
2.0 V/μm	0.940	14.92	50.57	7.09

DownLoad: CSV

	N_A/cm^–3	W/nm	V_bi/V
With BaTiO₃	5.82×10¹⁵	75.23	0.926
After Poling	3.91×10¹⁵	86.30	1.002

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]

[1]	Wang Hui, Zheng De-Xu, Jiang Xiao, Cao Yue-Xian, Du Min-Yong, Wang Kai, Liu Sheng-Zhong, Zhang Chun-Fu.Fabrication of high-performance flexible perovskite solar cells based on synergistic passivation strategy. Acta Physica Sinica, 2024, 73(7): 078401.doi:10.7498/aps.73.20231846
[2]	Wang Jing, Gao Shan, Duan Xiang-Mei, Yin Wan-Jian.Influence of defect in perovskite solar cell materials on device performance and stability. Acta Physica Sinica, 2024, 73(6): 063101.doi:10.7498/aps.73.20231631
[3]	Li Pei, Xu Jie, He Chao-Hui, Liu Jia-Xin.Experimental study on irradiation of perovskite solar cells. Acta Physica Sinica, 2023, 72(12): 126101.doi:10.7498/aps.72.20230230
[4]	Zhu Yong-Qi, Liu Yu-Xue, Shi Yang, Wu Cong-Cong.High performance perovskite solar cells synthesized by dissolving FAPbI₃single crystal. Acta Physica Sinica, 2023, 72(1): 018801.doi:10.7498/aps.72.20221461
[5]	Wang Cheng-Lin, Zhang Zuo-Lin, Zhu Yun-Fei, Zhao Xue-Fan, Song Hong-Wei, Chen Cong.Progress of defect and defect passivation in perovskite solar cells. Acta Physica Sinica, 2022, 71(16): 166801.doi:10.7498/aps.71.20220359
[6]	Sun Meng-Jie, He Zhi-Qun, Zheng Yi-Fan, Shao Yu-Chuan.Application of EDTA/SnO₂double-layer composite electron transport layer to perovskite solar cells. Acta Physica Sinica, 2022, 71(13): 137201.doi:10.7498/aps.71.20220074
[7]	Luo Yuan, Zhu Cong-Tan, Ma Shu-Peng, Zhu Liu, Guo Xue-Yi, Yang Ying.Low-temperature preparation of SnO₂electron transport layer for perovskite solar cells. Acta Physica Sinica, 2022, 71(11): 118801.doi:10.7498/aps.71.20211930
[8]	Zhou Yang, Ren Xin-Gang, Yan Ye-Qiang, Ren Hao, Du Hong-Mei, Cai Xue-Yuan, Huang Zhi-Xiang.Physical mechanism of perovskite solar cell based on double electron transport layer. Acta Physica Sinica, 2022, 71(20): 208802.doi:10.7498/aps.71.20220725
[9]	Wang Pei-Pei, Zhang Chen-Xi, Hu Li-Na, Li Shi-Qi, Ren Wei-Hua, Hao Yu-Ying.Research progress of inverted planar perovskite solar cells based on nickel oxide as hole transport layer. Acta Physica Sinica, 2021, 70(11): 118801.doi:10.7498/aps.70.20201896
[10]	Wang Jian-Tao, Xiao Wen-Bo, Xia Qing-Gan, Wu Hua-Ming, Li Fan, Huang Le.Influence of back electrode material, structure and thickness on performance of perovskite solar cells. Acta Physica Sinica, 2021, 70(19): 198404.doi:10.7498/aps.70.20211037
[11]	Zhang Chen, Zhang Hai-Yu, Hao Hui-Ying, Dong Jing-Jing, Xing Jie, Liu Hao, Shi Lei, Zhong Ting-Ting, Tang Kun-Peng, Xu Xiang.Morphology control of zinc oxide nanorods and its application as an electron transport layer in perovskite solar cells. Acta Physica Sinica, 2020, 69(17): 178101.doi:10.7498/aps.69.20200555
[12]	Zhu Li-Feng, Pan Wen-Yuan, Xie Yan, Zhang Bo-Ping, Yin Yang, Zhao Gao-Lei.Effect of regulation of defect ion on ferroelectric photovoltaic characteristics of BiFeO₃-BaTiO₃based perovskite materials. Acta Physica Sinica, 2019, 68(21): 217701.doi:10.7498/aps.68.20190996
[13]	Fan Wei-Li, Yang Zong-Lin, Zhang Zhen-Yun, Qi Jun-Jie.Preparation and performance of high-efficient hole-transport-material-free carbon based perovskite solar cells. Acta Physica Sinica, 2018, 67(22): 228801.doi:10.7498/aps.67.20181457
[14]	Liu Yi, Xu Zheng, Zhao Su-Ling, Qiao Bo, Li Yang, Qin Zi-Lun, Zhu You-Qin.Influence of phenyl-C61-butyric acid methyl ester (PCBM) electron transport layer treated by two additives on perovskite solar cell performance. Acta Physica Sinica, 2017, 66(11): 118801.doi:10.7498/aps.66.118801
[15]	Chai Lei, Zhong Min.Recent research progress in perovskite solar cells. Acta Physica Sinica, 2016, 65(23): 237902.doi:10.7498/aps.65.237902
[16]	Huang Lin-Quan, Zhou Ling-Yu, Yu Wei, Yang Dong, Zhang Jian, Li Can.Recent progress in graphene and its derivatives as interfacial layers in organic solar cells. Acta Physica Sinica, 2015, 64(3): 038103.doi:10.7498/aps.64.038103
[17]	Song Zhi-Hao, Wang Shi-Rong, Xiao Yin, Li Xiang-Gao.Progress of research on new hole transporting materials used in perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 033301.doi:10.7498/aps.64.033301
[18]	Ting Hung-Kit, Ni Lu, Ma Sheng-Bo, Ma Ying-Zhuang, Xiao Li-Xin, Chen Zhi-Jian.progress in electron-transport materials in application of perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 038802.doi:10.7498/aps.64.038802
[19]	Gong Wei, Xu Zheng, Zhao Su-Ling, Liu Xiao-Dong, Yang Qian-Qian, Fan Xing.Effects of NPB anode buffer layer on the performances of inverted bulk heterojunction polymer solar cells. Acta Physica Sinica, 2014, 63(7): 078801.doi:10.7498/aps.63.078801
[20]	Zhao Feng-Qi, Zhang Min, Li Zhi-Qiang, Ji Yan-Ming.Effects of optical phonon and built-in electric field on the binding energy of bound polarons in a wurtzite In0.19Ga0.81N/GaN quantum well. Acta Physica Sinica, 2014, 63(17): 177101.doi:10.7498/aps.63.177101

Catalog

Vol. 73, Issue 3 - 2024-02-05

Metrics

Abstract views:2089
PDF Downloads:61
Cited By:0

Search

Article