- 必威体育下载

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

Grain refinement of aluminium alloys can not only reduce the defects (such as segregation and hot tearing) but also improve the mechanical properties. Adding Al-5Ti-1B master alloy to the melt has become a common method to refine the solidification microstructure of aluminium alloys. A lot of researches have been carried out to uncover the grain refining mechanisms as well as to show the microstructure formation under the effect of grain refiner. These researches demonstrated that the grain refining efficiency is closely related to the number density of TiB ₂particles as well as the solute Ti concentration in the melt. However, there exist still problems to be resolved, such as the limited grain refinement potency of Al-5Ti-1B master alloy. Recently, the addition of trace La to the melt has attracted much attention to control the microstructure of aluminium alloys. The Al-Cu alloys are widely applied to the automobile and aerospace fields due to their high strength, good ductility and high temperature properties. It has been reported that Cu can segregate to Al/TiB ₂interface in the Al-Cu melt inoculated with Al-5Ti-1B master alloy. But the effect of Cu segregation on the grain refinement result is not clear yet. Meanwhile, whether the grain refinement effect of Al-5Ti-1B master alloy on Al-Cu alloy can be improved by the addition of trace La has not been reported. Solidification experiments are carried out for Al-2Cu alloy with the addition of Al-5Ti-1B master alloy+ trace La. The synergistic effect of trace La and Al-5Ti-1B on the solidification microstructure of Al-2Cu alloy is investigated. It is found that trace La can effectively enhance the refinement result of Al-2Cu alloy and further diminish the nucleation undercooling. Experimental and calculated results demonstrate that solute Cu segregates to the Al/TiB ₂interface and thus increases the interatomic spacing mismatch between Ti (0001) plane of the TiB ₂particles and the interfacial monolayer, while La segregation reduces the interatomic spacing mismatch. The trace La addition reduces the interfacial energy between α-Al and TiB ₂particles, improves the potency of TiB ₂particles to nucleate α-Al, and thus enhances the grain refinement result of Al-5Ti-1B master alloy.

Keywords:

Authors and contacts

Corresponding author:Zhang Li-Li,llzhang@imr.ac.cn; Zhao Jiu-Zhou,jzzhao@imr.ac.cn

Funds:Project supported by the National Key R&D Program of China (Grant No. 2021YFA0716303), the China Manned Space Station Project, and the National Natural Science Foundation of China (Grant Nos. 51901231, 51971227).

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]

Cited By

DownLoad: Full-Size Img PowerPoint

i	k_i	m_i/(K·%^–1)	$ {c'_{{\text{S}}i}}/\% $	$ {c'_{{\text{L}}i}}/\% $	Reference
Ti	7.8	33.3	—	—	[12]
Cu	0.17	–3.4	5.69	32.5	[34]
La	0.004	–1.71	0.05	11.7	[35]

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]

[1]	Dai Yu-Jia, Li Ming-Liang, Song Chao, Gao Xun, Hao Zuo-Qiang, Lin Jing-Quan.Accuracy improvement of Fe element in aluminum alloy by laser induced breakdown spectroscopy under spatial confinement combined with gradient descent. Acta Physica Sinica, 2021, 70(20): 205204.doi:10.7498/aps.70.20210792
[2]	Song Yan, Jiang Hong-Xiang, Zhao Jiu-Zhou, He Jie, Zhang Li-Li, Li Shi-Xin.Numerical simulations of solidification microstructure evolution process for commercial-purity aluminum alloys inoculated by Al-Ti-B refiner. Acta Physica Sinica, 2021, 70(8): 086402.doi:10.7498/aps.70.20201431
[3]	Guo Zhi-Chao, Li Ping-Lin.Grain refinement influence on the critical current density of the MgB2 superconductor sample. Acta Physica Sinica, 2014, 63(6): 067401.doi:10.7498/aps.63.067401
[4]	Guan Ren-Guo, Zhao Zhan-Yong, Huang Hong-Qian, Lian Chao, Chao Run-Ze, Liu Chun-Ming.Theoretical study on boundary distributions and flow-metal heat transfer during melt treatment by cooling sloping plate. Acta Physica Sinica, 2012, 61(20): 206602.doi:10.7498/aps.61.206602
[5]	Zhang Hui, Wu Di, Zhang Guo-Ying, Xiao Ming-Zhu.Study of the influence mechanism of additional elements on the corrosion behavior of bulk Cu-based amorphous alloys. Acta Physica Sinica, 2010, 59(1): 488-493.doi:10.7498/aps.59.488
[6]	Sun Dui-Xiong, Su Mao-Gen, Dong Chen-Zhong, Wang Xiang-Li, Zhang Da-Cheng, Ma Xin-Wen.Quantitative analysis of element concentration in Al alloy by using laser-induced breakdown spectroscopy. Acta Physica Sinica, 2010, 59(7): 4571-4576.doi:10.7498/aps.59.4571
[7]	Wang Na, Tang Bi-Yu.Structural，elastic and electronic properties of L12 aluminum phases from first principles calculation. Acta Physica Sinica, 2009, 58(13): 230-S234.doi:10.7498/aps.58.230
[8]	Fan Fei, Ban Chun-Yan, Wang Yang, Ba Qi-Xian, Cui Jian-Zhong.The resistivity evolution with temperature of 7050 aluminium alloy by different casting methods. Acta Physica Sinica, 2009, 58(1): 638-643.doi:10.7498/aps.58.638
[9]	Liu Gui-Li.Electron-theoretical study of grain refining mechanism of Mg alloys. Acta Physica Sinica, 2009, 58(5): 3319-3323.doi:10.7498/aps.58.3319
[10]	Liu Gui-Li.The electronic structure of the microstructure of Mg-Zr alloys. Acta Physica Sinica, 2008, 57(2): 1043-1047.doi:10.7498/aps.57.1043
[11]	Zhang Da-Cheng, Ma Xin-Wen, Zhu Xiao-Long, Li Bin, Zu Kai-Ling.Application of laser-induced breakdown spectroscopy in analyzing microelements in three kinds of fruit samples. Acta Physica Sinica, 2008, 57(10): 6348-6353.doi:10.7498/aps.57.6348
[12]	Zheng Li-Ping, Li Dou-Xing, Xu Zi-Jian, Zhu Zhi-Yuan.The dual-species model study of co-enrichment of trace elements and Ni at Ni3Al grain boundary. Acta Physica Sinica, 2007, 56(3): 1520-1525.doi:10.7498/aps.56.1520
[13]	Zhang Guo-Ying, Zhang Hui, Liu Chun-Ming, Zhou Yong-Jun.The grain boundary segregation of microalloying elements and the ultra-refinement of steel. Acta Physica Sinica, 2006, 55(3): 1369-1373.doi:10.7498/aps.55.1369
[14]	Pang Xue-Jun, Wang Qiang, Wang Chun-Jiang, Wang Ya-Qin, Li Ya-Bin, He Ji-Cheng.Effects of high magnetic fields on the distribution of solute elements in Al-alloys. Acta Physica Sinica, 2006, 55(10): 5129-5134.doi:10.7498/aps.55.5129
[15]	Peng Kai-Ping, Chen Wen-Zhe, Qian Kuang-Wu.Study of an anomalous serrated yielding phenomenon in 3004 aluminum alloy. Acta Physica Sinica, 2006, 55(7): 3569-3575.doi:10.7498/aps.55.3569
[16]	Wu Han-Hua, Long Bei-Hong, Lü Xian-Yi, Wang Jian-Bo, Jin Zeng-Sun.Study on the electrical parameter variation during microarc oxidation of alumini um alloys. Acta Physica Sinica, 2005, 54(4): 1697-1701.doi:10.7498/aps.54.1697
[17]	Zhang Guo-Ying, Zhang Hui, Liu Chun-Ming, Zhou Yong-Jun.The study on the ultrafine mechanism of steels: strain-induced phase-transform ation form austenite to ferrite. Acta Physica Sinica, 2005, 54(4): 1771-1776.doi:10.7498/aps.54.1771
[18]	Zhu Bo, Cai Xun, Wang Cheng-Guo, Cai Hua-Su.Studies on the relationship between acoustic emission characteristics and fractu re toughness of materials. Acta Physica Sinica, 2003, 52(8): 1960-1964.doi:10.7498/aps.52.1960
[19]	Zhang Qin, Ban Chun-Yan, Cui Jian-Zhong, Ba Qi-Xian, Lu Gui-Min, Zhang Bei-Jiang.The forced solution mechanism of alloying agents of 7075 alloy as-cast ingot und er the effects of electromagnetic field. Acta Physica Sinica, 2003, 52(10): 2642-2648.doi:10.7498/aps.52.2642
[20]	WANG ZHEN-XIA, PAN JI-SHENG, ZHANG JI-PING, TAO ZHEN-LAN.EFFECT OF SURFACE LOCAL ENRICHMENT ON PREFEREN-TIAL SPUTTERIONG OF ALLOY. Acta Physica Sinica, 1992, 41(10): 1722-1727.doi:10.7498/aps.41.1722

Catalog

Vol. 72, Issue 8 - 2023-04-20

Metrics

Abstract views:2765
PDF Downloads:46
Cited By:0

Search

Article