Efficient and stable carbon-based CsPbBr<sub>3</sub> solar cells added with PEABr additive

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

In recent years, organic-inorganic hybrid perovskite solar cells have become a research hotspot in the photovoltaic field because of their excellent power conversion efficiency. However, this hybrid perovskite material's intrinsic instability and the harsh preparation environment limit its further commercial application. All-inorganic CsPbBr ₃perovskite materials have attracted much attention because of their good stability, low cost and can be prepared in an atmospheric environment, showing great application potential. The controllable preparation and growth kinetics of CsPbBr ₃materials need to be further studied, and the conversion efficiency of photovoltaic devices is still low. Considering the instability caused by traditional organic hole transport materials and their high preparation cost, this work focuses on the systematical studies of CsPbBr ₃all-inorganic perovskite cells without a hole transport layer. Growth kinetics material of CsPbBr ₃is controlled by adding 2-phenylethylamine bromide to precursor solution _.The main research contents and results are described as follows. Based on multi-step spin-coating preparation of CsPbBr ₃perovskite films, the perovskite cell preparation method is studied, and the critical process parameters including the spin-coating PbBr ₂, amount and number of spin-coating of CsBr, substrate preheating temperature, and the annealing temperature, are optimized. The optimization tests show that the optimal spin-coating of CsBr is obtained by being optimized five times and the spin-coating PbBr ₂is conducted in the atmospheric environment. The optimal preheating temperature of the substrate is 80 ℃, and the optimal annealing temperature is 100 ℃. The perovskite films prepared under this condition are compact, each with a continuous high phase purity and good crystallization performance. The PbBr ₂in DMF is first adopted and the 2-phenylethylamine bromide (PEABr) solution is added to regulate the CsPbBr ₃crystalline quality of the film. The effects of PEABr on the perovskite crystallization process and device performance are systematically investigated. The results show that the introduction of PEABr can effectively optimize the CsPbBr ₃. The crystalline properties of the two-dimensional perovskite materials can improve the grain boundaries and improve their transport properties. The prepared perovskite solar cell with PEABr shows the highest power conversion efficiency of 8.25%, and it can maintain the efficiency of more than 90% when being stored for 1500 h under the condition of no encapsulation. Finally, stable, efficient and low-cost all-inorganic CsPbBr ₃solar cells without a hole layer are obtained.

Keywords:

Authors and contacts

Corresponding author:Hao Hui-Ying,huiyinghaoL@cugb.edu.cn; Dong Jing-Jing,jjdong@cugb.edu.cn;

Funds:Project supported by the Open Fund Project of Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences (Grant No. KLSMS-1901) and the National Natural Science Foundation of China (Grant No. 21875223)

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]

Cited By

DownLoad: Full-Size Img PowerPoint

旋涂次数	V_OC /V	J_SC /(mA·cm^–2)	PCE /%	FF /%
4	0.85	5.0	2.37	55
5	1.06	5.8	3.58	58
6	1.10	5.6	3.41	55
7	0.99	5.4	3.16	59

DownLoad: CSV

衬底温度	V_OC /V	J_SC /(mA·cm^–2)	PCE /%	FF /%
不预热	1.13	5.6	3.6	56
70 ℃	1.15	5.9	4.1	60
80 ℃	1.15	6.2	4.7	65
90 ℃	1.13	5.8	4.0	61

DownLoad: CSV

退火温度/℃	V_OC /V	J_SC /(mA·cm^–2)	PCE /%	FF /%
90	1.17	6.9	4.74	58
100	1.20	7.3	5.25	60
110	1.19	6.5	4.82	62

DownLoad: CSV

引入量 /(mg·mL^–1)	V_OC /V	J_SC /(mA·cm^–2)	PCE /%	FF /%
w/o	1.20	7.30	5.25	60
5	1.28	8.40	7.16	66
10	1.31	8.51	8.25	73
15	1.30	8.16	7.37	69

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]

[1]	Luo Pan, Li Xiang, Sun Xue-Yin, Tan Xiao-Hong, Luo Jun, Zhen Liang.Effect of electron irradiation on perovskite films and devices for novel space solar cells. Acta Physica Sinica, 2024, 73(3): 036102.doi:10.7498/aps.73.20231568
[2]	Wang Hui, Zheng De-Xu, Jiang Xiao, Cao Yue-Xian, Du Min-Yong, Wang Kai, Liu Sheng-Zhong, Zhang Chun-Fu.Fabrication of high-performance flexible perovskite solar cells based on synergistic passivation strategy. Acta Physica Sinica, 2024, 73(7): 078401.doi:10.7498/aps.73.20231846
[3]	Jin Cheng-Cheng, Ding Ling-Ling, Song Zi-Xin, Tao Hai-Jun.Improvement of performance of perovskite solar cells through BaTiO₃doping regulated built-in electric field. Acta Physica Sinica, 2024, 73(3): 038801.doi:10.7498/aps.73.20231139
[4]	Wang Fei, Yang Zhen-Qing, Xia Yu-Hong, Liu Chang, Lin Chun-Dan.Nonadiabatic molecular dynamics study on effect of Ge/Sn alloy on hot carrier relaxation of CsPbBr₃perovskite. Acta Physica Sinica, 2024, 73(2): 028801.doi:10.7498/aps.73.20231061
[5]	Li Pei, Xu Jie, He Chao-Hui, Liu Jia-Xin.Experimental study on irradiation of perovskite solar cells. Acta Physica Sinica, 2023, 72(12): 126101.doi:10.7498/aps.72.20230230
[6]	Zhu Yong-Qi, Liu Yu-Xue, Shi Yang, Wu Cong-Cong.High performance perovskite solar cells synthesized by dissolving FAPbI₃single crystal. Acta Physica Sinica, 2023, 72(1): 018801.doi:10.7498/aps.72.20221461
[7]	Xue Bin-Tao, Zhang Li-Min, Liang Yong-Qi, Liu Ning, Wang Ding-Ping, Chen Liang, Wang Tie-Shan.Proton irradiation induced damage effects in CH₃NH₃PbI₃-based perovskite solar cells. Acta Physica Sinica, 2023, 72(13): 138802.doi:10.7498/aps.72.20222100
[8]	Yang Mei-Li, Zou Li, Cheng Jia-Jie, Wang Jia-Ming, Jiang Yu-Fan, Hao Hui-Ying, Xing Jie, Liu Hao, Fan Zhen-Jun, Dong Jing-Jing.Improvement of performance of CsPbBr₃perovskite solar cells by polyvinylidene fluoride additive. Acta Physica Sinica, 2023, 72(16): 168101.doi:10.7498/aps.72.20230636
[9]	Wang Cheng-Lin, Zhang Zuo-Lin, Zhu Yun-Fei, Zhao Xue-Fan, Song Hong-Wei, Chen Cong.Progress of defect and defect passivation in perovskite solar cells. Acta Physica Sinica, 2022, 71(16): 166801.doi:10.7498/aps.71.20220359
[10]	Zhou Yang, Ren Xin-Gang, Yan Ye-Qiang, Ren Hao, Du Hong-Mei, Cai Xue-Yuan, Huang Zhi-Xiang.Physical mechanism of perovskite solar cell based on double electron transport layer. Acta Physica Sinica, 2022, 71(20): 208802.doi:10.7498/aps.71.20220725
[11]	Ma Shu-Peng, Lin Fei-Yu, Luo Yuan, Zhu Liu, Guo Xue-Yi, Yang Ying.Formation mechanism of CsPbBr₃in multi-step spin-coating process. Acta Physica Sinica, 2022, 71(15): 158101.doi:10.7498/aps.71.20220171
[12]	Wang Pei-Pei, Zhang Chen-Xi, Hu Li-Na, Li Shi-Qi, Ren Wei-Hua, Hao Yu-Ying.Research progress of inverted planar perovskite solar cells based on nickel oxide as hole transport layer. Acta Physica Sinica, 2021, 70(11): 118801.doi:10.7498/aps.70.20201896
[13]	.Adopting PEABr additive to obtain efficient and stable carbon-based CsPbBr3 solar cells. Acta Physica Sinica, 2021, (): .doi:10.7498/aps.70.20211344
[14]	Wang Yan-Bo, Cui Dan-Yu, Zhang Cai-Yi, Han Li-Yuan, Yang Xu-Dong.Recent advances in perovskite solar cells: Space potential and optoelectronic conversion mechanism. Acta Physica Sinica, 2019, 68(15): 158401.doi:10.7498/aps.68.20190569
[15]	Yang Ying-Guo, Yin Guang-Zhi, Feng Shang-Lei, Li Meng, Ji Geng-Wu, Song Fei, Wen Wen, Gao Xing-Yu.An in-situ real time study of the perovskite film micro-structural evolution in a humid environment by using synchrotron based characterization technique. Acta Physica Sinica, 2017, 66(1): 018401.doi:10.7498/aps.66.018401
[16]	Cao Ru-Nan, Xu Fei, Zhu Jia-Bin, Ge Sheng, Wang Wen-Zhen, Xu Hai-Tao, Xu Run, Wu Yang-Lin, Ma Zhong-Quan, Hong Feng, Jiang Zui-Min.Temperature-dependent time response characteristic of photovoltaic performance in planar heterojunction perovskite solar cell. Acta Physica Sinica, 2016, 65(18): 188801.doi:10.7498/aps.65.188801
[17]	Chai Lei, Zhong Min.Recent research progress in perovskite solar cells. Acta Physica Sinica, 2016, 65(23): 237902.doi:10.7498/aps.65.237902
[18]	Song Zhi-Hao, Wang Shi-Rong, Xiao Yin, Li Xiang-Gao.Progress of research on new hole transporting materials used in perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 033301.doi:10.7498/aps.64.033301
[19]	Shi Jiang-Jian, Wei Hui-Yun, Zhu Li-Feng, Xu Xin, Xu Yu-Zhuan, Lü Song-Tao, Wu Hui-Jue, Luo Yan-Hong, Li Dong-Mei, Meng Qing-Bo.S-shaped current-voltage characteristics in perovskite solar cell. Acta Physica Sinica, 2015, 64(3): 038402.doi:10.7498/aps.64.038402
[20]	Ting Hung-Kit, Ni Lu, Ma Sheng-Bo, Ma Ying-Zhuang, Xiao Li-Xin, Chen Zhi-Jian.progress in electron-transport materials in application of perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 038802.doi:10.7498/aps.64.038802

Catalog

Vol. 71, Issue 2 - 2022-01-20

Metrics

Abstract views:6748
PDF Downloads:191
Cited By:0

Search

Article