- 必威体育下载

姓名
邮箱
手机号码
标题
留言内容
验证码

Abstract

In recent years, organic-inorganic hybrid perovskite solar cells (PSCs) have attracted wide attention due to their high photoelectric conversion efficiency and simple preparation process. Hole transport layer (HTL) is one of the most critical components in PSCs. As a kind of inorganic HTL material, nickel oxide (NiO _x) has been widely used in perovskite solar cells because of its excellent advantages, such as outstanding chemical stability, high carrier mobility, simple methods for its preparation, etc. In this paper, the applications of NiO _xHTL in planar PSCs are systematically summarized from the aspects of the improvment of its structure and photoelectric properties by doping and interface modification. The reasons for affecting the device performances, i.e. fill factor, open-circuit voltage, short-circuit current, photoelectric conversion efficiency, and stability are emphatically analyzed from several aspects, such as energy level matching, hole mobility and crystallinity. In addition, the future development directions of the planar PSCs are prospected.

Keywords:

Authors and contacts

Corresponding author:Zhang Chen-Xi,zhangchenxi@tyut.edu.cn; Hao Yu-Ying,haoyuying@tyut.edu.cn

Funds:Project supported by the National Natural Science Foundation of China (Grant No. 62074108), the Joint Foundation of National Natural Science Foundation of China and Shanxi Coal-Based Low-Carbon Nurturing Project (Grant No. U1710115), the Major Special Projects of Shanxi Province in Science and Technology, China (Grant No. 20201101012), the Platform and Base Special Project of Shanxi, China (Grant No. 201805D131012-3), and the Natural Science Foundation of Shanxi Province, China (Grant No. 201901D211114)

FullText HTML: translate this paragraph

References

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]
[39]
[40]
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
[55]
[56]
[57]
[58]
[59]

Cited By

DownLoad: Full-Size Img PowerPoint

器件结构	电压 V_oc/V	电流 J_sc/(mA·cm^–2)	填充因子FF	光电转换效率PCE/%	掺杂/方法	文献
ITO/F2HCNQ:NiO_x/PMMA/CsMAFA/PCBM/BCP/Ag	1.14	23.44	0.83	22.13	F2HCNQ:NiO_xspin-coating	[17]
ITO/F6TCNNQ:NiO_x/CsFAMA/ PCBM/ZrAcac/Ag	1.12	23.18	0.80	20.86	F6TCNNQ/Spin coating	[41]
ITO/Cu:NiO_x/CH₃NH₃PbI₃/C₆₀/BCP/Ag	1.12	22.28	0.81	20.26	Cu:NiO_xNPs/Spin coating	[42]
ITO/Li:Co NiO_x/MA_1yFA_yPbI_3xCl_x/ PCBM/BCP/Ag	1.09	23.80	0.78	20.10	Li:Co/Spin-coating	[40]
ITO/Sr:NiO_x/CH₃NH₃PbI₃/C₆₀/BCP/Ag	1.14	22.66	0.76	19.49	Sr:NiO/Spin-coating	[38]
ITO/NiO_x:AGQDs/CsFAMA/PCBM/BCP/Ag	1.05	22.30	0.83	19.40	NiO_x:AGQDs/Spin-coating	[43]
FTO/Cs:NiO_x/MAPbI₃/PCBM/ZrAcac/Ag	1.12	21.77	0.79	19.35	Cs/Spin coating sol	[37]
ITO/NiMgO/CH₃NH₃PbI₃/PCBM/ZnMgO/Al	1.08	21.30	0.80	18.50	Mg/Sputtering	[44]
FTO/NIR-Co:NiO_x/MAPbI₃/PC₆₁BM/PEI/Ag	1.09	20.46	0.80	17.77	Co/Spin-coating	[35]
FTO/NiMgLiO/MAPbI₃/PCBM/Ti(Nb)O_x/Ag	1.07	20.21	0.75	16.20	Li-Mg/Spray pyrolysis	[45]

DownLoad: CSV

器件结构	电压 V_oc/V	电流 J_sc/(mA·cm^–2)	填充因子FF	光电转换效率PCE/%	改性/方法	文献
ITO/NiO_x/KCl/CsFAMA/PCBM/ZrAcac/Ag	1.15	22.89	0.80	20.96	KCl or NaCl/ Spin-coating	[51]
ITO/NiO_x/PFN-P2/CsFAMA/C₆₀/BCP/Ag	1.13	23.33	0.78	20.50	PFN-P2	[53]
FTO/NiO_x/SDBS/CH₃NH₃PbI₃/ PCBM/BCP/Ag	1.12	22.94	0.78	20.15	SDBS/Spin-coating	[54]
ITO/NiO_x/NH₄F/CH₃NH₃PbI₃/C₆₀/BCP/Ag	1.09	22.45	0.77	18.94	NH₄F/Spin-coating	[50]
ITO/NiO_x/TPI-6MEO/MAPbI₃/ PCBM/BCP/Ag	0.98	23.31	0.81	18.42	TPI-6MEO/ Spin-coating	[49]
ITO/NiO_x/SAM/Perovskite/ PCBM/Bis-C₆₀/Ag	1.11	21.70	0.76	18.40	Benzoic acid modification	[55]
ITO/NiO_x/FDA/CH₃NH₃PbI₃/PCBM/AgAl	1.04	22.55	0.76	17.87	FDA modification	[48]
FTO/NiO_x/PTAA/FA_1–xMA_xPb (I_3–yBr_y)/PCBM/Au	1.06	21.54	0.75	17.10	PTAA/Sol–gel	[56]

DownLoad: CSV

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]
[39]
[40]
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
[55]
[56]
[57]
[58]
[59]

[1]	Wang Hui, Zheng De-Xu, Jiang Xiao, Cao Yue-Xian, Du Min-Yong, Wang Kai, Liu Sheng-Zhong, Zhang Chun-Fu.Fabrication of high-performance flexible perovskite solar cells based on synergistic passivation strategy. Acta Physica Sinica, 2024, 73(7): 078401.doi:10.7498/aps.73.20231846
[2]	Xu Jie, Feng Ze-Hua, Liu Bing-Ye, Zhu Xin-Yi, Dai Jin-Fei, Dong Hua, Wu Zhao-Xin.Preparation and optoelectronic characteristics of perovskite module devices in air assisted by polymer inner packaging layern. Acta Physica Sinica, 2023, 72(24): 248802.doi:10.7498/aps.72.20231055
[3]	Yu Yuan, Xing Ruo-Fei, Du Hui-Tian, Zhou Qian, Fan Ji-Hui, Pang Zhi-Yong, Han Sheng-Hao.Performance of trans perovskite solar cells improved by finely adjusting the particle size of nickel oxide nanoparticles through pH value. Acta Physica Sinica, 2023, 72(1): 018101.doi:10.7498/aps.72.20221640
[4]	Wang Cheng-Lin, Zhang Zuo-Lin, Zhu Yun-Fei, Zhao Xue-Fan, Song Hong-Wei, Chen Cong.Progress of defect and defect passivation in perovskite solar cells. Acta Physica Sinica, 2022, 71(16): 166801.doi:10.7498/aps.71.20220359
[5]	Sun Meng-Jie, He Zhi-Qun, Zheng Yi-Fan, Shao Yu-Chuan.Application of EDTA/SnO₂double-layer composite electron transport layer to perovskite solar cells. Acta Physica Sinica, 2022, 71(13): 137201.doi:10.7498/aps.71.20220074
[6]	Wang Gui-Qiang, Bi Jia-Yu, Liu Jie-Qiong, Lei Miao, Zhang Wei.Enhancing quality of CsPbIBr₂inorganic perovskite via cellulose acetate addition for high-performance perovskite solar cells. Acta Physica Sinica, 2022, 71(1): 018802.doi:10.7498/aps.71.20211074
[7]	Luo Yuan, Zhu Cong-Tan, Ma Shu-Peng, Zhu Liu, Guo Xue-Yi, Yang Ying.Low-temperature preparation of SnO₂electron transport layer for perovskite solar cells. Acta Physica Sinica, 2022, 71(11): 118801.doi:10.7498/aps.71.20211930
[8]	Zhou Yang, Ren Xin-Gang, Yan Ye-Qiang, Ren Hao, Du Hong-Mei, Cai Xue-Yuan, Huang Zhi-Xiang.Physical mechanism of perovskite solar cell based on double electron transport layer. Acta Physica Sinica, 2022, 71(20): 208802.doi:10.7498/aps.71.20220725
[9]	Yan Jia-Hao, Chen Si-Xuan, Yang Jian-Bin, Dong Jing-Jing.Improving efficiency and stability of organic-inorganic hybrid perovskite solar cells by absorption layer ion doping. Acta Physica Sinica, 2021, 70(20): 206801.doi:10.7498/aps.70.20210836
[10]	Ji Chao, Liang Chun-Jun, You Fang-Tian, He Zhi-Qun.Effect of interface modification on performances of organic-inorganic hybrid perovskite solar cells. Acta Physica Sinica, 2021, 70(2): 028402.doi:10.7498/aps.70.20201222
[11]	Wu Jia-Long, Dou Yong-Jiang, Zhang Jian-Feng, Wang Hao-Ran, Yang Xu-Yong.Perovskite light-emitting diodes based on solution-processed metal-doped nickel oxide hole injection layer. Acta Physica Sinica, 2020, 69(1): 018101.doi:10.7498/aps.69.20191269
[12]	Zhang Chen, Zhang Hai-Yu, Hao Hui-Ying, Dong Jing-Jing, Xing Jie, Liu Hao, Shi Lei, Zhong Ting-Ting, Tang Kun-Peng, Xu Xiang.Morphology control of zinc oxide nanorods and its application as an electron transport layer in perovskite solar cells. Acta Physica Sinica, 2020, 69(17): 178101.doi:10.7498/aps.69.20200555
[13]	Li Xiao-Guo, Zhang Xin, Shi Ze-Jiao, Zhang Hai-Juan, Zhu Cheng-Jun, Zhan Yi-Qiang.Research progress of interface passivation of n-i-p perovskite solar cells. Acta Physica Sinica, 2019, 68(15): 158803.doi:10.7498/aps.68.20190468
[14]	Fan Wei-Li, Yang Zong-Lin, Zhang Zhen-Yun, Qi Jun-Jie.Preparation and performance of high-efficient hole-transport-material-free carbon based perovskite solar cells. Acta Physica Sinica, 2018, 67(22): 228801.doi:10.7498/aps.67.20181457
[15]	Liu Yi, Xu Zheng, Zhao Su-Ling, Qiao Bo, Li Yang, Qin Zi-Lun, Zhu You-Qin.Influence of phenyl-C61-butyric acid methyl ester (PCBM) electron transport layer treated by two additives on perovskite solar cell performance. Acta Physica Sinica, 2017, 66(11): 118801.doi:10.7498/aps.66.118801
[16]	Xiao Di, Wang Dong-Ming, Li Xun, Li Qiang, Shen Kai, Wang De-Zhao, Wu Ling-Ling, Wang De-Liang.Nickel oxide as back surface field buffer layer in CdTe thin film solar cell. Acta Physica Sinica, 2017, 66(11): 117301.doi:10.7498/aps.66.117301
[17]	Chai Lei, Zhong Min.Recent research progress in perovskite solar cells. Acta Physica Sinica, 2016, 65(23): 237902.doi:10.7498/aps.65.237902
[18]	Huang Lin-Quan, Zhou Ling-Yu, Yu Wei, Yang Dong, Zhang Jian, Li Can.Recent progress in graphene and its derivatives as interfacial layers in organic solar cells. Acta Physica Sinica, 2015, 64(3): 038103.doi:10.7498/aps.64.038103
[19]	Ting Hung-Kit, Ni Lu, Ma Sheng-Bo, Ma Ying-Zhuang, Xiao Li-Xin, Chen Zhi-Jian.progress in electron-transport materials in application of perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 038802.doi:10.7498/aps.64.038802
[20]	Song Zhi-Hao, Wang Shi-Rong, Xiao Yin, Li Xiang-Gao.Progress of research on new hole transporting materials used in perovskite solar cells. Acta Physica Sinica, 2015, 64(3): 033301.doi:10.7498/aps.64.033301

Catalog

Vol. 70, Issue 11 - 2021-06-05

Metrics

Abstract views:14228
PDF Downloads:644
Cited By:0

Search

Article