- 必威体育下载

姓名
邮箱
手机号码
标题
留言内容
验证码

摘要

对于带高电荷的胶体粒子形成的胶体晶体，用现有的剪切模量与粒子间相互作用的理论模型去计算剪切模量时，得到的结果要比实验测量值大很多，而根据此理论模型由剪切模量测量值拟合得到的粒子表面有效电荷也比实验测量的表面有效电荷小很多.这个问题一直没有合理的解释.分析认为这是由于理论模型基于理想晶体，并没有考虑到实际晶体中存在孔隙等缺陷会造成材料机械性能的下降.针对该因素，本文对已有的理论模型进行了修正，引入了孔隙造成的影响，同时使用Sogami-Ise相互作用势代替原来常用的Yukawa作用势.研究中用扭转共振法测量了带电粒子胶体晶体的剪切模量，比较了分别根据修正前后的关系模型由所测剪切模量拟合的有效电荷（弹性有效电荷），证实修正后的理论模型更合理，与使用Alexander等的方法得到的归一化电荷相比，一致性有了明显提高.

关键词:

Abstract

According to the existing shear modulus-pair potential relationship model for colloidal crystal comprised of highly charged colloidal particles, the calculated shear moduli of colloidal crystals are much larger than the measured values by the torsional resonance spectroscopy (TRS). Moreover, by using the relationship model, the effective surface charge of colloidal particles, obtained by fitting values of shear moduli measured by TRS (effective elasticity charge), is smaller than that obtained through the experimental method of conductivity-number density relationship (effectively transported charge). So far there has been no practical explanation to this discrepancy. Our analysis shows that this discrepancy is because the existing relationship model is for the perfect crystals and does not include the defects such as voids which can result in the decrease of mechanical properties of materials. The existing shear modulus-pair potential model will be improved by introducing the effect of voids, which is inspired from the Gibson-Ashby model in the study of cellular solid. The Yukawa potential, which considers Coulomb repulsions between colloidal particles and is usually used in the model expressions, will be substituted by Sogami-Ise potential, which considers a long-range attraction in addition to that Coulomb repulsions and accepts the existence of voids inside the colloidal crystals. For five different kinds of highly charged colloidal particles, the shear moduli with different volume fractions are measured by TRS. Then the fitted effective surface charges using the original and improved model respectively are compared with each other. It can be concluded that the effective elastic charge obtained by the improved model is more suitable and much closer to the renormalized charge obtained from Alexander's method. It is also clear that neither the effectively transported charge nor the Alexander's renormalized charge can be used to evaluate the shear moduli of colloidal crystals with voids inside. These results can also let us further understand and use the effective surface charge in the colloid studies.

Keywords:

作者及机构信息

1.
2.
3.

通信作者:王林伟,wanglinwei@outlook.com;xush@imech.ac.cn; 徐升华,wanglinwei@outlook.com;xush@imech.ac.cn;

基金项目:国家自然科学基金（批准号：11302226，11572322，11672295）资助的课题.

Authors and contacts

1.
2.
3.

Corresponding author:Wang Lin-Wei,wanglinwei@outlook.com;xush@imech.ac.cn; Xu Sheng-Hua,wanglinwei@outlook.com;xush@imech.ac.cn;

Funds:Project supported by the National Natural Science Foundation of China (Grant Nos. 11302226, 11572322, 11672295).

参考文献

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]

施引文献

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]

[1]	赵小安, 徐升华, 周宏伟, 孙祉伟.电解质浓度对胶体粒子表面有效电荷的影响. 必威体育下载 , 2021, 70(5): 056402.doi:10.7498/aps.70.20201472
[2]	程怡婷, AndreyS. Makarov, GennadiiV. Afonin, VitalyA. Khonik, 乔吉超.基于剪切模量和热分析数据研究Zr_50–_xCu₃₄Ag₈Al₈Pd_x(x= 0, 2)非晶合金缺陷浓度演化. 必威体育下载 , 2021, 70(14): 146401.doi:10.7498/aps.70.20210256
[3]	周贤明, 赵永涛, 程锐, 雷瑜, 王瑜玉, 任洁茹, 刘世东, 梅策香, 陈熙萌, 肖国青.近玻尔速度氙离子激发钒的K壳层X射线. 必威体育下载 , 2016, 65(2): 027901.doi:10.7498/aps.65.027901
[4]	陈书赢, 王海斗, 马国政, 康嘉杰, 徐滨士.等离子喷涂层原生性孔隙几何结构的分形及统计特性. 必威体育下载 , 2015, 64(24): 240504.doi:10.7498/aps.64.240504
[5]	李龙, 王鸣, 倪海彬, 沈添怿.采用溶胶凝胶协同自组装与光刻相结合的方法在反蛋白石结构薄膜中引入二维缺陷. 必威体育下载 , 2014, 63(5): 054206.doi:10.7498/aps.63.054206
[6]	李小龙, 陆颖, 翟永亮, 吴兰生, 孙威, 胡书新.平板电极间胶体晶体在电场作用下的各向同性压缩. 必威体育下载 , 2013, 62(17): 176105.doi:10.7498/aps.62.176105
[7]	倪海彬, 王鸣, 陈威.采用溶胶凝胶协同自组装方法制备SiO2反蛋白石结构薄膜及其光学性质研究. 必威体育下载 , 2012, 61(8): 084211.doi:10.7498/aps.61.084211
[8]	顾凌云, 徐升华, 孙祉伟.带电粒子形成胶体晶体的有效硬球模型判据的计算机模拟验证. 必威体育下载 , 2011, 60(12): 126402.doi:10.7498/aps.60.126402
[9]	孙其诚, 张国华, 王博, 王光谦.半柔性网络剪切模量的计算. 必威体育下载 , 2009, 58(9): 6549-6553.doi:10.7498/aps.58.6549
[10]	侯日立, 彭建祥, 经福谦.一种计算金属剪切模量的本构模型：以Al为例. 必威体育下载 , 2009, 58(9): 6413-6418.doi:10.7498/aps.58.6413
[11]	刘蕾, 徐升华, 孙祉伟, 段俐, 解京昌, 林海.二元体系胶体晶体性质的实验研究. 必威体育下载 , 2008, 57(11): 7367-7373.doi:10.7498/aps.57.7367
[12]	杜启振, 刘莲莲, 孙晶波.各向异性粘弹性孔隙介质地震波场伪谱法正演模拟. 必威体育下载 , 2007, 56(10): 6143-6149.doi:10.7498/aps.56.6143
[13]	冯增朝, 赵阳升, 吕兆兴.二维孔隙裂隙双重介质逾渗规律研究. 必威体育下载 , 2007, 56(5): 2796-2801.doi:10.7498/aps.56.2796
[14]	冉宪文, 汤文辉, 谭华, 戴诚达.考虑材料熔化潜热的高温高压本构. 必威体育下载 , 2006, 55(6): 2852-2855.doi:10.7498/aps.55.2852
[15]	刘蕾, 徐升华, 刘捷, 段俐, 孙祉伟, 刘忍肖, 董鹏.带电胶体粒子结晶过程的实验研究. 必威体育下载 , 2006, 55(11): 6168-6174.doi:10.7498/aps.55.6168
[16]	韦中超, 戴峭峰, 汪河洲.毛细管中柱对称类面心结构胶体晶体的光谱特性. 必威体育下载 , 2006, 55(2): 733-736.doi:10.7498/aps.55.733
[17]	华劲松, 经福谦, 谭华, 周显明.一种计算剪切模量温度系数的方法. 必威体育下载 , 2005, 54(1): 246-250.doi:10.7498/aps.54.246
[18]	彭建祥, 经福谦, 王礼立, 李大红.冲击压缩下铝、铜、钨的剪切模量和屈服强度与压力和温度的相关性. 必威体育下载 , 2005, 54(5): 2194-2197.doi:10.7498/aps.54.2194
[19]	胡建波, 俞宇颖, 戴诚达, 谭华.冲击加载下铝的剪切模量. 必威体育下载 , 2005, 54(12): 5750-5754.doi:10.7498/aps.54.5750
[20]	华劲松, 经福谦, 谭华.一种获得剪切模量压强二阶偏导数G″P的方法. 必威体育下载 , 2000, 49(12): 2443-2447.doi:10.7498/aps.49.2443

计量

文章访问数:5592
PDF下载量:172
被引次数:0

搜索

留言板

Theoretical improvement on the determination of effective elasticity charges for charged colloidal particles

摘要

Abstract

作者及机构信息

1.
2.
3.

通信作者:王林伟,wanglinwei@outlook.com;xush@imech.ac.cn; 徐升华,wanglinwei@outlook.com;xush@imech.ac.cn;

Authors and contacts

1.
2.
3.

Corresponding author:Wang Lin-Wei,wanglinwei@outlook.com;xush@imech.ac.cn; Xu Sheng-Hua,wanglinwei@outlook.com;xush@imech.ac.cn;

参考文献

施引文献

目录

计量

作者中心

必威betway88欢迎你

关于期刊

关于我们

搜索

留言板

Theoretical improvement on the determination of effective elasticity charges for charged colloidal particles

摘要

Abstract

作者及机构信息

1.2.3.

通信作者:王林伟,wanglinwei@outlook.com;xush@imech.ac.cn; 徐升华,wanglinwei@outlook.com;xush@imech.ac.cn;

Authors and contacts

1.2.3.

Corresponding author:Wang Lin-Wei,wanglinwei@outlook.com;xush@imech.ac.cn; Xu Sheng-Hua,wanglinwei@outlook.com;xush@imech.ac.cn;

参考文献

施引文献

目录

计量

出版历程

作者中心

必威betway88欢迎你

关于期刊

关于我们

1.
2.
3.

1.
2.
3.