Magnetically driven loading technology is to load the large pulse current to the test area through the pulsed power, which forms a smooth magnetic pressure rising over time to achieve a quasi-isentropic compression of sample and hyper-velocity flyer launch. Based on the output characteristics and parameters of PTS accelerator, two types of hyper-velocity flyer launch experiments with different load configurations, such as the load, flyer plates size, current waveform and diagnostic systems etc, are designed and tested. LY12 aluminum flyer plates with dimensions of 10 mm0.725 mm was launched by single-sided stripline load configuration to 11.5 km/s while the magnetic drive load pressure is near 0.9 10^5 MPa. Simulation and experimental results agrees well with those of in the flyer launch process and the ultimate velocity. Further simulation shows that the launch velocity of aluminum flyer plates with dimensions of 8.5 mm1 mm is expected to exceed 15 km/s under the program of optimizing the structural parameters and regulation. The design and experiment technology of hyper-velocity flyer launch based on multi-branch pulsed power generator has been mastered during the designs and experiments.