Femtosecond lasers with GHz repetition rate play an important role in scientific and industrial applications such as spectroscopy, optical frequency combs and GHz-Burst pulse trains for micro-machining in the ablation-cooled regime. Kerr-lens mode-locked (KLM) technique and passively mode-locking based on semiconductor saturable absorber mirror (SESAM) are the primary methods to generate GHz femtosecond all-solid-state lasers (ASSLs). Kerr-lens mode-locked Ti:Sapphire lasers have made significant progress benefited from the high-power green pump lasers, and repetition rate up to 10 GHz has been obtained with the average power of 1.2 W. In the early 21st century, ytterbium ion (Yb ³⁺) doped laser crystals and ceramics with emission wavelengths near 1 μm received attention due to their high conversion efficiency and broad gain-bandwidth. Combining the customized SESAM and high-power multimode fiber-coupled laser diodes (LDs), GHz Yb-doped ASSLs with watt-level average power may be easily attained and have made rapid progress. However, GHz KLM lasers have strict requirements for the cavity design and pump sources. For satisfying mode matching and enhancing the soft aperture effect within the gain medium, a high-brightness pump source with excellent beam quality ( M ²～ 1) is desired, such as the single-mode fiber coupled LD, however, the maximum pump power of which is only ～1 W. As a result, the average power of GHz KLM femtosecond laser is typically limited to few tens of milliwatts, which limits the further applications. In this work, we report the first GHz high-power KLM Yb:CaYAlO ₄laser by using a high-power single-mode fiber laser instead of the low-power single-mode fiber coupled LDs as the pump source. On the basis of ABCDmatrix, a simple four-mirror bow-tie ring cavity is built so that the laser mode can match well with the focused pump spot in the crystal. At the pump power of 8 W, stable unidirectional KLM is achieved, the laser has the average power of 2.1 W with a pulse duration of 88 fs and a repetition rate of 1.8 GHz, corresponding to the peak power of 11.57 kW. The high peak power and extremely short pulse duration are crucial for coherent octave-spanning supercontinuum generation. The powerful GHz KLM laser with sub-100 fs pulse duration provides an attractive source for realizing the optical frequency combs and micro-machining applications.